Some of the most common reasons for not generating an Spring Creator can be easily remedied by addressing one or more of the issues below. Please use the table to determine how to adjust your design to generate an Spring Creator .
Compression Spring Warnings
Extension Spring Warnings
Torsion Spring Warnings
| Issue | Issue Description | Solution | How do I get more Help? |
|---|---|---|---|
| Wire Diameter (WD) |
0.008" to 1.250" Music Wire (MW) and Stainless Steel 302 (SST 302) in almost all sizes. For sizes 0.080" to 1.250" Chrome Silicon (CS) and Stainless Steel 17-7 (SST 17-7) in almost sizes. Please refer to the wire diameter table to check exact size Click here! |
Please make sure your wire diameter corresponds with one on the wire size list | If you need a quote out of another wire diameter please email us at info@springcreator.com |
| Index too small |
Minimum index is 4.5 on wire diameters from 0.008" to 0.236" and 5.0 on wire diameters 0.116" and above Index = Mean Dia. ÷ Wire Dia. |
If your index is too small you will need to decrease the wire diameter or increase the outer diameter | If you need help with a spring index issue, please email us at info@springcreator.com |
| Index too large |
Maximum index is 25.0 on all wire diameters. Index = Mean Dia. ÷ Wire Dia. |
If your spring index is too large, you will need to increase the outer diameter or decrease the wire diameter | If you need help with a spring index issue, please email us at info@springcreator.com |
| Outer Diameter (OD) is outside the quotable ranges | Outer diameter must be larger than 0.046" and less than 5.000" | Make sure you increase the OD to 0.050" or greater. | If you need a quote on a spring with an OD outside the quotable ranges, please email us at info@springcreator.com |
| Free Length (FL) is outside the quotable ranges | Free Length must be larger than 0.130" and less than 36.000" | Make sure you increase the FL to 0.130" or greater. |
If you need a quote on a spring with a FL outside the quotable ranges, please email us at info@springcreator.com |
| Total Coils (TC) are outside the quotable ranges | Minimum 1 active coil (3 total coils). Maximum 250 active coils. | Make sure your spring has between 1 and 250 active coils. | If you need a quote on a spring with active coils outside the quotable ranges, please email us at info@springcreator.com |
| Solid Height is greater than Free Length |
Solid height must be less than free length. Solid Height = Wire Dia. x Total Coils + Wire Dia. |
Make the wire diameter smaller, the free length longer, or reduce the number of coils. | If you need help solving a solid height conflict, please email us at info@springcreator.com |
| Pitch is too high | Pitch must be less than 12 times the wire diameter. | Add coils, increase the wire diameter, or reduce the free length. | If you need help solving a pitch conflict, please email us at info@springcreator.com |
| Issue | Issue Description | Solution | How do I get more Help? |
|---|---|---|---|
| Wire Diameter (WD) |
0.015" to 0.050" Music Wire (MW) and Stainless Steel 302 (SST 302) in almost all sizes and hooks. For sizes 0.116" to 0.160" only with Side Hooks and for sizes over 0.116" to 0.236" with No Hooks. Please refer to the wire diameter table to check exact size Click here! |
Please make sure your wire diameter corresponds with one on the wire size list | If you need a quote out of another wire diameter please email us at info@springcreator.com |
| Index too small |
Minimum index is 4.5 on wire diameters from 0.008" to 0.236" and 5.0 on wire diameters 0.118" and above Index = Mean Dia. ÷ Wire Dia. |
If your index is too small you will need to decrease the wire diameter or increase the outer diameter | If you need help with a spring index issue, please email us at info@springcreator.com |
| Index too large |
Maximum index is 25.0 on all wire diameters. Index = Mean Dia. ÷ Wire Dia. |
If your spring index is too large, you will need to increase the outer diameter or decrease the wire diameter | If you need help with a spring index issue, please email us at info@springcreator.com |
| Outer Diameter (OD) is outside the quotable ranges | Outer diameter must be larger than 0.046" and less than 5.000" | Make sure you increase the OD to 0.046" or greater. | If you need a quote on a spring with an OD outside the quotable ranges, please email us at info@springcreator.com |
| Length inside Hooks (LIH) is outside the quotable ranges | Length inside Hook must be larger than 0.130" and less than 36.000" | Make sure you increase the LIH to 0.130" or greater. |
If you need a quote on a spring with a LIH outside the quotable ranges, please email us at info@springcreator.com |
| Total Coils (TC) are outside the quotable ranges | Minimum 1 active coil (3 total coils). Maximum 250 active coils. | Make sure your spring has between 1 and 250 active coils. | If you need a quote on a spring with active coils outside the quotable ranges, please email us at info@springcreator.com |
| Hooks | On wires over 0.116" only quote No Hooks and Side Hooks | Make sure your Wire Spring and Hook selected has between the ranges | If you need a quote on a spring with hooks outside the quotable ranges, please email us at info@springcreator.com |
| Issue | Issue Description | Solution | How do I get more Help? |
|---|---|---|---|
| Wire Diameter (WD) |
0.008" to 0.175" Music Wire (MW) and Stainless Steel 302 (SST 302) in almost all sizes. Please refer to the wire diameter table to check exact size Click here! |
Please make sure your wire diameter corresponds with one on the wire size list. | If you need a quote out of another wire diameter please email us at info@springcreator.com |
| Index too small |
Minimum index is 4.5 on wire diameters from 0.008" to 0.236" and 5.0 on wire diameters 0.118" and above Index = Mean Dia. ÷ Wire Dia. |
If your index is too small you will need to decrease the wire diameter or increase the outer diameter | If you need help with a spring index issue, please email us at info@springcreator.com |
| Index too large |
Maximum index is 25.0 on all wire diameters. Index = Mean Dia. ÷ Wire Dia. |
If your spring index is too large, you will need to increase the outer diameter or decrease the wire diameter | If you need help with a spring index issue, please email us at info@springcreator.com |
| Outer Diameter (OD) is outside the quotable ranges | Outer diameter must be larger than 0.750" and less than 4.000" | Make sure you increase the OD to 0.050" or greater. | If you need a quote on a spring with an OD outside the quotable ranges, please email us at info@springcreator.com |
| Body Length (BL) is outside the quotable ranges | Body Length must be larger than 0.130" and less than 6.000" | Make sure you increase the BL to 0.130" or greater. |
If you need a quote on a spring with a BL outside the quotable ranges, please email us at info@springcreator.com |
| Total Coils (TC) are outside the quotable ranges | Minimum 1 active coil (3 total coils). Maximum 35 active coils. | Make sure your spring has between 1 and 35 active coils. | If you need a quote on a spring with active coils outside the quotable ranges, please email us at info@springcreator.com |
| Leg Length (LL) are outside the quotable range |
The range is 0.050" to 0.75" into wires of 0.008" to 0.032" The range is 0.1" to 1.5" into wires of 0.033" to 0.080" The range is 0.75" to 3.000" into wires of 0.80" to 0.175" |
Make sure your spring has between LL ranges | If you need a quote on a spring with leg lengths outside the quotable ranges, please email us at info@springcreator.com |
If all of the above specifications are met and you still didn't receive an Spring Creator, you may have a design flaw. Please contact us for more help.
Please make sure you are using one of the wire diameters below along with the correct material type for your design in order to be able to generate a Spring Creator.
| Wire Diameter | Music Wire | Stainless 302 | Chrome Silicon | Stainless 17-7 |
|---|---|---|---|---|
| 0.008" to 0.046" All Sizes | x | x | ||
| 0.047" | x | |||
| 0.0475" | x | |||
| 0.048" | x | |||
| 0.049" to 0.052" All Sizes | x | x | ||
| 0.053" | x | |||
| 0.054" to 0.061" All Sizes | x | x | ||
| 0.0625" | x | x | ||
| 0.064" to 0.072" All Sizes | x | x | ||
| 0.073" | x | |||
| 0.074" to 0.076" All Sizes | x | x | ||
| 0.078" | x | |||
| 0.079" | x | |||
| 0.080" | x | x | x | |
| 0.081" | x | |||
| 0.082" | x | x | ||
| 0.083" | x | |||
| 0.084" | x | |||
| 0.085" to 0.088" All Sizes | x | x | ||
| 0.089" | x | |||
| 0.090" | x | x | x | |
| 0.091" | x | x | x | |
| 0.092" to 0.095" All Sizes | x | x | ||
| 0.097" | x | x | ||
| 0.098" | x | x | x | |
| 0.099" | x | |||
| 0.100" | x | x | x | |
| 0.102" | x | x | x | |
| 0.103" | x | |||
| 0.105" | x | x | x | x |
| 0.106" | x | |||
| 0.107" | x | |||
| 0.109" | x | x | ||
| 0.110" | x | x | ||
| 0.112" | x | x | ||
| 0.113" | x | x | x | |
| 0.114" | x | x | ||
| 0.115" | x | x | x | |
| 0.116" | x | x | ||
| 0.118" | x | x | x | x |
| 0.120" | x | x | x | |
| 0.125" | x | x | x | |
| 0.130" | x | x | ||
| 0.135" | x | x | x | |
| 0.140" | x | x | ||
| 0.142" | x | x | ||
| 0.145" | x | x | ||
| 0.146" | x | x | ||
| 0.148" | x | x | x | x |
| 0.150" | x | x | ||
| 0.156" | x | x | x | |
| 0.160" | x | x | ||
| 0.162" | x | x | x | x |
| 0.165" | x | x | ||
| 0.170" | x | x | ||
| 0.172" | x | x | x | |
| 0.175" | x | x | ||
| 0.177" | x | x | ||
| 0.180" | x | x | ||
| 0.187" | x | x | x | x |
| 0.192" | x | x | ||
| 0.200" | x | x | ||
| 0.207" | x | x | x | x |
| 0.216" | x | x | ||
| 0.225" | x | x | x | x |
| 0.234" | x | x | ||
| 0.236" | x | x | ||
| 0.250" | x | x | x | x |
| 0.262" | x | x | x | x |
| 0.281" | x | x | x | |
| 0.282" | x | |||
| 0.300" | x | x | ||
| 0.312" | x | x | x | x |
| 0.343" | x | x | x | x |
| 0.362" | x | |||
| 0.375" | x | x | x | x |
| 0.394" | x | x | x | x |
| 0.406" | x | x | ||
| 0.437" | x | x | x | |
| 0.453" | x | x | ||
| 0.468" | x | x | ||
| 0.500" | x | x | x | x |
| 0.532" | x | x | ||
| 0.562" | x | x | x | |
| 0.625" | x | x | ||
| 0.687" | x | x | ||
| 0.750" | x | x | ||
| 0.813" | x | x | ||
| 0.875" | x | x | ||
| 0.937" | x | x | ||
| 1.000" | x | x | ||
| 1.062" | x | x | ||
| 1.125" | x | x | ||
| 1.187" | x | x | ||
| 1.250" | x | x |
Your 3D is being generated, 3D generation Will take approximately 15 seconds. Your 3D Will load automatically on this page.
Your 3D is being generated, 3D generation Will take approximately 15 seconds. Your 3D Will load automatically on this page.
Spring Creator is an Acxess Spring Product, You will be redirected to acxesspring.com for your purchase
Click to open acxesspring.com